![](/remote/aHR0cHM6Ly9naWVjZG4uYmxvYi5jb3JlLndpbmRvd3MubmV0L2ZpbGV1cGxvYWRzL2ltYWdlLzIwMjEvMDMvMDkvZXBhd2ViLmpwZw.pPiHnw4RBIM.jpg?w=948&h=533&format=webp&mode=pad&anchor=middlecenter&scale=both&bgcolor=F0F1F2)
The U.S. Environmental Protection Agency (EPA) has made new data available related to per- and polyfluoroalkyl (PFAS) compounds found in fluorinated containers in which a mosquito control product was packaged and sold. EPA is also announcing its planned next steps to further characterize and address this potential source of contamination.
While the EPA isn’t naming the product or manufacturer directly, The Boston Globe previously reported the pesticide is known as Anvil 10+10, which is manufactured by Illinois-based Clarke. According to the Globe, the pesticide first began being tested by the Department of Environmental Protection last fall after a Washington advocacy group reported the product contained PFAS.
Since first becoming aware of the PFAS contamination issue in September 2020, EPA says it has been working to investigate the source of the contamination. In December 2020, EPA studied the fluorinated HDPE containers used to store and transport the product and preliminarily determined the fluorination process used may be the source of PFAS contamination.
In January, EPA continued its testing that showed that PFAS compounds were most likely formed from a chemical reaction during the container fluorination process, which then leached into the pesticide product. According to the EPA, after completing a quality assurance and quality control process, it can confirm that it has detected eight different PFAS from the fluorinated HDPE containers, with levels ranging from 20-50 parts per billion.
While EPA is early in its investigation, the agency says it will use all available regulatory and non-regulatory tools to determine the scope of this emerging issue and its potential impact on human health and the environment.
“It is important to note that although these types of products should not be a source of PFAS, the data indicates that the amount of PFAS that has entered the environment from the contamination in the containers the agency tested is extremely small,” the EPA noted in a release. “The agency is also committed to coordinating with the affected entities involved and their supply and distribution chains; pesticide users; the pesticide and packaging industry; and its federal, state and tribal partners as it works through this complex health and environmental issue.”
Building on the agency’s initial actions announced in January, EPA initiated a series of steps to tackle this issue including:
- On Jan. 13, to minimize risks to human health and the environment, EPA asked states with existing stock of the mosquito product distributed in fluorinated HDPE containers to discontinue use and hold that inventory until its final disposition is determined. The pesticide manufacturer has also notified all its customers regarding management of the product, voluntarily stopped shipments of all products in fluorinated HDPE containers, and is now using non-fluorinated containers.
- On Jan. 14, EPA issued a TSCA subpoena to the company that fluorinated the containers supplied to the manufacturer of the pesticide in which PFAS was discovered to learn more about the fluorination process used on the HDPE containers.
- EPA is aware that many companies are using fluorinated HDPE containers to store and distribute pesticide and other products. EPA is actively working with the Food and Drug Administration, the U.S. Department of Agriculture, and industry and trade organizations to raise awareness of this emerging issue and discuss expectations of product stewardship. For example, EPA is coordinating with the Ag Container Recycling Council, the American Chemistry Council, Crop Life America, the Household & Commercial Products Association, and the National Pest Management Association.
- The agency is also testing different brands of fluorinated containers to determine whether they contain and/or leach PFAS, and if so, learn the conditions affecting leaching. EPA will present these findings as expeditiously as possible.
- The agency is encouraging the pesticide industry to explore alternative packaging options, like steel drums or non-fluorinated HDPE.
“Advancing science and taking action to reduce the health risks associated with PFAS go hand-in-hand,” EPA Acting Assistant Administrator for the Office of Chemical Safety and Pollution Prevention Michal Freedhoff says. “The Biden-Harris Administration’s focus on developing and using the best available science will guide our decision-making, strengthen our work with stakeholders, and lead to pragmatic solutions that advance our efforts to address PFAS contamination and protect human health.”
Data regarding the EPA’s findings can be found online.
Latest from Waste Today
- GFL reaches agreement on PFAS
- Casella recognizes sustainability leaders
- Clean Harbors adds co-CEOs to board of directors
- Develon opens customization plant
- AMCS purchases Qv21 Technologies
- Connecticut makes $15M in grant funding available for materials management infrastructure
- New York City officials incinerate seized cannabis at Reworld facility
- LanzaTech signs contract with Japanese chemicals firm